RC byggesett fra Tamiya av Fiat Abarth 1000 TCR Berlina Corse. Modellen er i skala 1/10 og kommer på det nye MB-01 chassiset som er en videreutvikling av M-05 chassiset. Det er valgfritt om man ønsker å bygge den med forhjuls eller bakhjulsdrift. Leveres med karosseri i holdbart polykarbonat og en kraftig 540 børstemotor.
Behøves utenom som ikke er inkludert:
2-kanals fjernkontroll og mottaker
7.2V Ni-Mh batteripakke og lader
Farstregulator (ESC)
Styreservo
Hurtiglim (CA Lim)
Spesifikasjoner:
RC byggesett
Chassis type: MB-01
Skala: 1/10
Lengde: 32,2 cm
Bredde: 16,3 cm
Høyde: 15 cm
Terreng: On-road
Drift: 2WD (mulighet for både forhjuls og bakhjulsdrift)
Fartsregulator (ikke inkludert)
Batteripakke: 7,2V Ni-Mh med Tamiya-kontakt (ikke inkludert)
Motor: Børstemotor (inkludert)
Karosseri: gjennomsiktig polykarbonat
Lakk/maling anbefalt av Tamiya:
PS-1 White
PS-31 Smoke
PS-32 Corsa Gray
X-18 Semi Gloss Black
XF-2 Flat White
XF-7 Flat Red
XF-16 Flat Aluminum
Informasjon fra Tamiya:
The origin of M-chassis series history goes back to December 1994, and this series has been popular due to cost-effective kits with a wide choice of bodies, ease of maintenance and control for any level user. Enter, the all-new MB-01!
The new MB-01 chassis continues that tradition and allows six setups by choosing from three types of wheelbases, and front- or rear- wheel drive system. Its first body recreates the Fiat Abarth 1000 TCR Berlina Corse which was a car developed with high level tune-ups based upon the compact 2-door Fiat 600.
The MB-01 Chassis
The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.
• Length: 322mm, width: 163mm. Wheelbase: 209mm (S) / 224mm (M) / 239mm (L) (*Fiat Abarth uses the LONG wheelbase setup).
• The multi-purpose, 2WD MB-01 chassis gives choices of three types of wheelbases (*), and front- or rear- wheel drive system. Six setups are available in total.
• Simply change attachment directions of final gears and steering linkage to switch between front- and rear- wheel drive; low or high motor position can be chosen for rear-wheel drive cars.
• Unitized sections such as motor mount and final gears facilitate ease of assembly and effective maintenance.
• The 4-wheel double wishbone suspension features symmetrical structure and friction dampers.
• While this is a 2WD model, multi-link suspension is compatible with tires featuring the same compound and rear tire with toe-in as 4WD models.
• Gear ratio: 5.83:1 (when using kit-standard 29T pinion gear)
• Features 55mm diameter front tires and 60mm diameter rear tires to authentically recreate the stance of the actual car.
• Many Hop-Up Option parts for M-chassis and TT-chassis cars can be used to fine-tune setup.
• Includes 540 motor.
• Requires 2-channel radio, 7.2-7.4volt battery with compatible charger, ESC and Tamiya PS paint to complete.
